Imperial Eastman No. 489-F Plumber’s Finishing Kit
Furnished in vinyl carrying pouch.
No. 489-F Plumber’s Finishing Kit Contains No. 127-FA Tube Cutter and No. 199-F 9/16, 5/8 & 13/16″ wrenches.
back to Imperial Eastman Ratchet Wrenches & Adapters page
back to Imperial Eastman page
back to Products Overview
Imperial Eastman No. 299-F & 399-F Kwik Tite Ratchet Wrenches Kits
Furnished in roll-up type vinyl kit.
No. 299-F Contains No. 199-F 3/8, 1/2, 5/8, 3/4, 7/8 and 1″ wrenches.
No. 399-F Contains No. 199-F 1/2, 9/16, 5/8 & 3/4″ wrenches.
back to Imperial Eastman Ratchet Wrenches & Adapters page
back to Imperial Eastman page
back to Products Overview
Imperial Eastman No. 499-F Kwik Tite Ratchet Wrenches
Please specify Catalog Number and Size when ordering.
back to Imperial Eastman Ratchet Wrenches & Adapters page
back to Imperial Eastman page
back to Products Overview
No. 199-F Kwik Tite Ratchet Wrenches
Please specify Catalog Number and Size when ordering.
back to Imperial Eastman Ratchet Wrenches & Adapters page
back to Imperial Eastman page
back to Products Overview
Imperial Eastman Reamers and Test Plugs No. 345-FA & 346-F Refacing Tools
Restores nicked and marred seats on brass and other nonferrous fittings and valves to almost brand new.
Has precision feed control for cutter. Cutter can be replaced.
No. 345-FA 45 deg. Refacing Tool complete with cutter adn adapters for 1/4, 5/16, 3/8, 1/2 and 5/8″ fittings. Furnished in steel kit.
No. 346-F Adapter only for 345-F and 345-FA. Specify size.
back to Imperial Reamers, Test Plugs & Refacing Tools page
back to Imperial Eastman page
back to Products Overview
Imperial Eastman Reamers and Test Plugs No. 240-F Tubing Test Caps
For shutting off tube ends temporarily without pinching off or installing a valve. Used for working pressures to 100 psi. No need to deburr tubing. Can be used even when tube surface is rough. Also, wall thickness of tube is unimportant. Place cap over tube end and tighten wing nut. Synthetic rubber seal of cap grips outside of tube.
Order by Catalog Number and O.D. Size
Cat. No. O.D. of Tube Cat. No. O.D. of Tube
240-F 1/4 240-F 3/8
240-F 5/16 240-F 1/2
back to Imperial Reamers, Test Plugs & Refacing Tools page
back to Imperial Eastman page
back to Products Overview
Imperial Eastman Reamers and Test Plugs No. 140-F Tubing Test Plugs
For temporary shut-off of tubing without pinching it off or installing a valve. Especially handy for plumbing, heating, refrigeration and instrumentation when trouble shooting for leaks. Light weight, fast acting, dependable. Insert plug in tube end and tighten wing nut. Synthetic rubber expander seals tube and holds pressures to 100 psi.
Order by Catalog Number and O.D. Size.
Cat. No. O.D. size Cat. No. O.D. size
140-F 1/4 140-F 7/8
140-F 3/8 140-F 1.1/8
140-F 1/2 140-F 1.3/8
140-F 5/8 140-F 1.5/8
140-F 3/4
No. 142-F Test Plug Kit for sizes 1/2, 5/8 and 7/8″ O.D. In plastic case.
back to Imperial Reamers, Test Plugs & Refacing Tools page
back to Imperial Eastman page
back to Products Overview
No. 401-FA Reaming & Deburring Tool
Removes inner burrs from all metal tubing. Hardened tool steel reamer with tapered cutting edges. Sharp, precise cutting angles. Fine thread feed screw gives sensitive control. Self-centering forged steel yoke.
No. 401-FA Reaming Yoke only. For 1/4 to 5/8″ O.D. tubing.
Used with flaring bar furnished with No. 400-F Flaring Tool.
back to Imperial Reamers, Test Plugs & Refacing Tools page
back to Imperial Eastman page
back to Products Overview
No. 208-F Inner-Outer Reamer
Reams both inside and outside edges of tube with 3 hollow ground tool steel cutters. Fluted body is shaped to fit comfortably in palm.
No. 208-F Reamer for copper, aluminum, brass tubing - 3/16″ to 1.1/2″ O.D.
No. 208-FSS Reamer for aircraft grade stainless steel tubing; hard or soft copper, aluminum, brass and steel tubing. Has high speed steel cutters.
Pat. No. 2,242,821.
back to Imperial Reamers, Test Plugs & Refacing Tools page
back to Imperial Eastman page
back to Products Overview
No. 700-F Gear-Type Tube Bender
Makes bends up to 180 deg. in stainless steel tubing (MIL-T-6845). Precision construction maintains original diameter of tube within 5% at bend. Also bends copper, aluminum and other types of tubing. Calibrated dial indicates angle of bend.
No. 700-F Gear-Type Tube Bender for 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. tubing. Furnished in steel case.
Tubing Wall Thickness and Bend Radii for Stainless Steel (MIL-T-6845) Tubing
(In some cases these wall thicknesses can be exceeded for copper and aluminum tubing. Experimentation is suggested to determine what thicknesses can be bent successfully.)
O.D. Tube Wall Thichness Bend Radius to Centr. of Tube
(In.) (In.) (In.)
1/4 .016 to .049 9/16
5/16 .020 to .065 11/16
3/8 .028 to .083 1516
1/2 .035 to .083 1.1/4
5/8 .042 to .083 1.1/2
3/4 .049 to .083 1.3/4
Pat. No. 2,986,195.
Conforms to Federal Specification GGG-B-191a, 3-1-63 and Interim Amendment No. 2, 9-16-64, Type I, Class 1.
back to Imperial Tube Benders page
back to Imperial Eastman page
back to Products Overview
